Mobile Rack Series

 
 
iR8774 (1 floppy bay 2 x M.2 SATA SSD Internal RAID Module)

 

The front panel provides RAID mode adjustment settings to make RAID configuration easier

 

Easy to install it into your PC/Server

 

iR8774 not only provides you the multiple RAID features but also gives you a simple structure for installation. You could just install it into your PC/Server easily by yourself for having so many RAID features.

 

The iR8774 has four RAID modes (RAID 1/0/JBOD/SPAN(BIG) ). You can easily select the modes based on the demand when installing the gaming system. If you need to emphasize the security of the operating system, you can choose to install a high-speed M.2 SATA SSD and set it to RAID 1 mode (data security). And if you want to have the faster storage speed, you can switch the iR8774 system to RAID 0 mode (capacity increased) for better performance on your gaming system. 

iR8774 exact same SATA Connector Locations, Dimension, and Screw Holes as 3.5” hard disk drive
 

RAIDON iR8774 internal RAID module supports SATA III 6.0 Gb/s host interface and SATA 15 pin power supply; the connector’s location exactly as the same as a 3.5” hard drive. Thus, it is not necessary to install any other brackets but just install the iR8774 inside to existing PC and then it will be upgraded to be a PC system with a Hardware RAID storage!

A new RAID mode adjustment setting is added on the front panel to make RAID setting easier

 

iR8774 adds a new RAID mode adjustment setting on the front panel to make RAID setting easier, users can adjust the four modes of RAID 0/1/SPAN(BIG) and JBOD via the jumper on the front panel, giving users more storage options. The iR8774 has a more thoughtful design. The front panel of the device provides a button that can turn off the mute, so that the buzzer can be turned off when the device encounters a failure, so as to avoid constant buzzing and noise.

 

RAID 1 function provides fully automatic backup that ensures data security.
RAID 0 function increases storage speed and performance.
JBOD function provides two independent disk data access convenience.
BIG function provides two independent disk capacity added total.

Support 2 x M.2 SATA SSD trays

 

RAIDON's easy-to-use disk tray module comes with a key lock and secure the tray with screws. User can buy several tray modules and secured the tray modules first, once there is one M.2 SATA SSD in iR8774 is failure, just replace the M.2 SATA SSD directly. It can greatly reduce the wait time for system maintenance.

Fan-less, Cooling Hole Design

 

For high-speed production line, the most worried about is the system failure. It will shut down the production line and cause the money loss. By using iR8774’s RAID 1 mode, you can keep the production line working 24hr and no worry about the system shut down caused by the unexpected hard drive failure. iR8774 is the most cost-effective solution.

Surveillance application, iR8774 - a good device for your DVR monitoring system

 
iR8774 is to designed for you to easily install into your DVR monitoring system.  And being with M.2 SATA SSD, you could enjoy its RAID 1 level data protection with a huge memory size for video storage. And the RAID 1 level feature still protects your data and keeps your DVR working properly even if one of the M.2 SATA SSDs are defect at the same.

Makes the system faster and keeps the photo data more safe


 
iR8774 can be easily used in a workstation for photographers. Using two M.2 SATA SSDs, iR8774 can provide faster performance than hard drive, it will be faster for photographer to run Photoshop, Lightroom or other photo-editing software. By using RAID 0 (mirroring) mode, the RAW files will have a copy automatically when it be save into iR8774. Photographer will be no longer to worry about the data loss caused by the hard drive failure.

JBOD Independent M.2 SATA SSD Data Exchange

 

If your project files are too large to be transmitted via the internet, or you need to send the same data out for use with different devices, such as editing photo or video files up to 500G ~ 750G, the design of removable HDD/SSD tray is perfect for your requirements. In the independent JBOD mode of iR8774, each M.2 SATA SSD can be work independently, just like an independent database. You can qucikly change the library you need, and back up your important data offsite to meet the various needs in the different computer environments.

Product View

Specification


 
Model No iR8774-S3
RAID Chip JMS562
Interfaces SATA III (6Gbps) Ports 

Compatible Drives 2 x M.2 SATA SSD (2242/2260/2280)
Storage Level RAID 0/1/JBOD/SPAN (BIG)

* Added RAID mode adjustment settings on the front panel.
LED Yes
Operating System Windows, Linux
Cooling System 4 cm Low noise fan
Electrical and
Operating 
Requirements
* Line voltage: 12V + 5V DC
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 116° F (-20° to 47° C)
* Relative humidity: 5% to 95% non-condensing
Dimension & Weight 102(W)×26(H)×147(L) mm
Product Code iR8774
EAN:
UPC:
Carton 10 pcs per carton
Package Accessories *iR8774
*SATA Cable x 1
*Accessory Kit-for Tray
*Accessory Kit-for Case
*Quick installation guide

 

iR8774-S3 (EOL) Download

Product
Datasheet
QM
UM
CE & FCC
Photo
other
iR8774-S3 (EOL)
GUI Software for Windows

iR8774-S3 (EOL) Question & Answer

 

RaidonTek.com (raidon.com.tw) uses cookies to improve site functionality and your overall experience by storing necessary information for service delivery. By continuing, you consent to our use of cookies as detailed in our Privacy Policy, which provides more information about this usage. (Accept cookies to continue browsing the website)